Bluetooth RFID Reader

This compact, handheld RFID Wireless Bluetooth reader is battery operated and communicates wirelessly with a host computer via a standard Bluetooth interface. The host computer may be either a Pocket PC or a desktop PC. The Bluetooth interface enables the operator to gather transponder data and communicate at a distance of up to 10m from the host computer. On board status LEDs and a power/read switch incorporated into the design. The Bluetooth reader provides the ability to read and write to either 134kHz low frequency transponders or alternatively ISO15693 13.56MHz high frequency transponders. Available as an Explorer kit which comes complete with the RFID reader, sample RFID tags, demonstration application, source code and full documentation

Product Datasheet (203kB )

Standard LF Bluetooth PUK Reader:	1017-01-BT-LF-ST
Standard HF Bluetooth PUK Reader:	1020-01-BT-HF-ST

A case review is available for this product, please click here

Operating Frequencies	134.2kHz or 13.56MHz
Operating Temperature	-25°C to +50°C
Storage Temperature	-30°C to +45°C
Relative Humidity	5% to 90% RH Non Condensing
Dimensions	56×41×21 mm
Weight	51g
Enclosure material	Conductive polymer
Approvals	EN 300 330, EN 301 489
LF Transponder types supported	134.2kHz TIRIS
HF Transponder types supported	-  ISO15693 compliant -  Texas Instruments Tag-It -  Philips I-CODE II -  My-ID -  Inside Technologies Picotag
CENELEC (IS versions of product)	EEx ib IIC T4 (-20ºC <Tamb <50ºC)
Environmental rating	IP57
Typical LF Read range	Max 6cm using 32mm glass transponder
Typical HF Read range	Max 5cm using ISO7810 size credit card format transponders.

PUK1.jpg (328kB )

PUK2.jpg (304kB )

PUK3.jpg (209kB )

PUK4.jpg (568kB )

 

Product Datasheet (203kB )
HF Quick Start Guide (348kB )
LF Quick Start Guide (307kB )
HF Programmer's Guide (279kB )
LF Programmer's Guide (173kB )
PC Demonstration Software and ActiveX control (1,552kB )
ActiveX Control Documentation (138kB )
Pocket PC Demonstration Software (3,094kB )