Low Frequency
RFID Reader for Motorola MC70/75/75A
This reader provides the Motorola™ MC70, MC75 and MC75A
with dual LF support at 125kHz and 134.2kHz. The LF RFID
reader is powered from the Motorola terminal and houses
both the RFID reader and the antenna. The Motorola
MC70/75/75A retains the original laser bar code
functionality as well as the original communications
platform housed within the terminal. The LF RFID reader
provides the ability to read and write to a wide variety
of manufacturer specific transponders including NXP
(Philips) HITAG, EM Microelectronic and Texas Instruments.
Serial interface on COM1 of MC70, ASCII or Binary Protocols 9600bit/s to 115200bit/s 8,N,1.
Reading distance
Dependent on transponder type and antenna.
Typically up to 8cm for Texas Instruments 32mm glass, up to 7cm for EM4102 50mm disc.
Current consumption
Typically 50mA whilst active (dependent on transponder types)
0mA in shutdown
mode
User indication
Red, Green LEDs
Flash indicating
activity (function may also be customised)
Connection Interfaces
Physical interface
USB and power in to
charge MC70/75/75A
Reader power supply
Powered from host
terminal
ActiveSync
via USB
Physical Characteristics
Dimensions
90×82×32mm
(3.54"x3.23"x1.26")
Weight
95g (3.35 oz)
Enclosure material
Polycarbonate
Colour
Grey
Material Finish
Sparked Surface
Mechanical Attachment
Snap-on action with
optional locking screws
Docking
Attachment
maintains dockability with Motorola docking cradle for
charging and ActiveSync
Environmental
Operating Temperature
-10°C to +50°C
(14°F to 122°F)
Storage Temperature
-40°C to +60°C
(-40°F to 140°F)
Humidity
Up to 90% Relative
humidity Non Condensing
Drop specification
1.3m (4.26ft) to
concrete, 6 drops per 6 sides over operating
temperature; 1.5m
(5ft) to concrete, 2 drops per 6 sides at ambient temperature
23ºC (73ºF)
