|
|
|
|
The family of Biometric Tri-Scan Readers combine Contact Smart
Card, Contactless Smart Card (RFID) and Finger Biometric
capture in a rugged, snap on peripheral for the Motorola
MC70/75. This makes them ideal for mobile fingerprint
biometric and ID applications. The fingerprint sensors
are FIPS201 compliant as single finger capture devices.
Tri-Scan readers are powered by the MC70/75 terminal
and the mechanical design allows them to remain compatible
with existing MC70/75 accessories such as the desktop
charge cradle and car charger.
There are three versions of the
product in the family:
-
Capacitive fingerprint
sensor used in the reader
-
Optical
fingerprint sensor used in the reader
-
No
fingerprint sensor (smartcard
only)
The Product
Datasheets provide more information on the different
versions.
The Tri-Scan Reader is compatible with most contact
and contactless Smart Cards including all Mifare
contactless cards. The contactless card reader is
hardware compatible with the CAC card and ICAO ePassports. The contact Smart Card reader is compliant
to ISO7816-1,2,3,4.
For more information on biometrics, click
here
|
| Sensor resolution |
508dpi
(capacitive)
500dpi (optical) |
| Pixel array |
256 x 360 pixels
(capacitive)
256 x 400 pixels (optical) |
| Sensor area |
12.8 x 18.0 mm
(capacitive)
14 x 22mm (optical) |
| ESD protection |
IEC 61000-4-2 Level
4 ±15kV |
| Image size |
Approximately
100kbyte |
| Template size |
Algorithm dependent
– typically 100-400 bytes |
| Compliance |
ISO7816-1,2,3,4
PC/SC, EMV2000 Level 1 capable.
T=0, T=1 Protocol. I2C |
| Connector |
Meets ISO 7816-2,
rated for >100 000 insertions |
| Card size |
Full (ID-1) |
| Card support |
Up to 420kBps card
interface, clock frequency up to 8MHz,
5V, 3V, 1.8V smart cards |
| RF Transmit
Frequency |
13.56MHz |
| Supported RFID
Standards |
ISO14443A,
ISO14443B, ISO 15693, ISO 18000-3 |
| Supported
contactless cards |
+ ISO15693
+ ISO14443A/B
+ Phillips: MIFARE, DESFire, MIFARE ProX, SMART MX
+ HID: iClass |
| Reading
distance |
Intended for
in-slot card reading, capable of reading up to 2.5cm
(1")
from back surface dependent on transponder type |
|
|
|
Charging of host terminal |
Possible through
reader |
|
Reader power supply |
Powered from host
terminal |
|
ActiveSync |
via USB,
automatically switched when connected to a PC |
|
Dimensions |
90×82×36mm
(3.54"x3.23"x1.42") |
|
Weight |
100g (3.6 oz)
Capacitive
110g (3.9 oz) Optical |
|
Enclosure material |
Lexan Polycarbonate/ABS |
|
Colour |
Grey |
|
Material finish |
Sparked surface |
|
Mechanical attachment |
Snap-on action with
optional locking screws |
| Docking |
Attachment
maintains dockability with Motorola docking cradle for
charging and ActiveSync |
|
Operating Temperature |
-10°C to +50°C
(14°F to 122°F) |
|
Storage Temperature |
-40°C to +60°C
(-40°F to 140°F) |
|
Humidity |
Up to 90% Relative
humidity Non Condensing
|
| Drop
specification |
1.3m (4.26ft) to
concrete, 6 drops per 6 sides over operating
temperature; 1.5m (5ft) to concrete, 2 drops per 6
sides at ambient
temperature 23ºC (73ºF) |
| Sealing |
Internal components
conformal coated |
|
Electrostatic discharge |
+/-15kV air
discharge, +/-8kV direct discharge |
|
Construction |
RoHS compliant |
|
EMI/RFI |
TBC |
|
Electrical Safety |
TBC |
|
|
|
|
|
