Smartcard Reader for Motorola MC75

This accessory for the MC75 series of terminals provides a Smart Card and Memory card capability. The unit attaches as a sleeve around the MC75 - the mechanical design of the module enables the attachment to remain compatible with existing MC75 accessories such as the desktop charge cradle and the car charger. The USB port from the MC75 is brought through to the docking connector on the bottom of the Smart Card reader to provide ActiveSync connectivity to the MC75. The Smart Card Reader is compliant to ISO7816-1,2,3,4, supports T=0 and T=1 protocols and Synchronous and Asynchronous mode. The reader is based on industry standards, including PC/SC, EMV, FINREAD and Common Criteria to address a wide range of applications across government, enterprise and financial sectors.

Product Datasheet (319KB)

Part No.

1060-01-SO-MC75-CSC

A case review is available for this product, please click here

 

 

 

 

 

 

 

 

Compliance	-  ISO7816-1,2,3,4 -  T=0, T=1 Protocol -  Synchronous and Asynchronous mode
Power source	MC75 switched 5V output
Current consumption	<5mA idle 50mA nominal operating current during card operation (influenced by smart card current)
Physical Characteristics
Dimensions	95 x 80 x 28 mm
Weight	90g
Environmental Characteristics
Operating temperature	-0°C to +50°C
Storage Temperature	-25°C to +60°C
Humidity	5% to 90% RH Non Condensing
Enclosure material	ABS/PC

Smartcard1.jpg (347kB )

Smartcard2.jpg (922kB )

Smartcard3.jpg (319kB )

 

 

 

 

 

 

 

 

 

 

Product Datasheet (319KB )
Quick Start Guide (4,201kB )
Full User Guide (763kB )
Smartcard Reader Driver (137kB )