|
|
|
|
This compact snap-on reader
integrates:
+ A contact and contactless
ISO7816 smart card reader
+ An OCR-B swipe reader for
the Machine Readable Zone (MRZ) of a Passport
+ A high resolution, high
contrast ratio finger biometric sensor
+ A Magnetic Swipe Card Reader
- tracks 1, 2, and 3 with optional decoding of AAMVA
and Financial cards
+ A high capacity Lithium polymer battery pack.
The reader can be used with all product variants of
the Motorola MC70/75/75A to provide a full featured PIV and
ePassport mobile reader.
Product Datasheet
Part No.1093-01-SO-MMB
|
| Acquisition Rate |
15 frames/second |
| Identification Time (1:100) |
1s typical |
| Enrolment time |
5s typical |
| Verification time (1:1) |
0.5s typical |
| Acquisition rate |
15 frames/second |
| False Rejection Rate (FRR) |
Adjustable |
| False Acceptance Rate (FAR) |
Adjustable |
| Sensor resolution |
508dpi |
| Pixel array |
256 x 360 pixels |
| Sensor area |
12.8 x 18.0 mm |
| ESD protection |
IEC 61000-4-2 Level 4 ±12kV |
| Image size |
Approximately 100kbyte |
| Template
size |
Algorithm dependent – typically 300-400 bytes |
| |
|
|
Compliance |
ISO7816-1,2,3,4 PC/SC, EMV2000 Level 1 capable
T=0, T=1 Protocol. I2C |
| Connector |
Meets ISO 7816-2, rated for >100 000 insertions |
| Card size |
Full (ID-1) |
| Card
support |
Up to 420Kbps card interface, clock frequency up
to 8MHz, 5V, 3V, 1.8V smart cards |
| |
|
| RF Transmit Frequency |
13.56MHz |
| Supported
contactless cards |
ISO 15693
ISO 14443A
ISO 14443B
Philips MIFARE®, DESFIRE®, MIFARE Prox®, SMART MX,
ICODE®
HID iClass® |
| Reading distance |
Up to 4cm |
| |
|
| Data Format |
Raw data from tracks 1,2 and 3 |
| Direction of Read |
Bi-Directional |
| Interface |
API supports a variety of standard card formats |
|
Compatibility |
ISO,ANSI and AAMVA compatible |
|
Durability |
Up to 1 000 000 passes with ISO conforming cards |
| |
|
| Read
Formats |
Machine readable passports (MRP), visas (MRV)
and travel cards conforming to ICAO 9303, US
Resident Alien cards, European National ID cards,
APACS debit and credit documents, E13B and OCR-B
fonts |
| Direction of read |
Bi-Directional |
| |
|
| EMI/RFI |
TBC |
| Electrical Safety |
TBC |
| |
|
| Physical
Interface |
Serial and power in to charge MC70 |
| Reader power supply |
Powered from host terminal |
| Active Sync |
Via USB |
| |
|
|
Dimensions |
210 x 90 x 75mm (8.23 x 3.56 x 2.95") |
| Weight |
350g (12.3 oz) |
| Enclosure Material |
Lexan EXL Polycarbonate |
| Colour |
Grey |
| Material Finish |
Sparked Surface |
|
Mechanical Attachment |
Snap-on action with locking screws |
| Docking |
The snap-on is compatible with the standard
MC70/75 single slot cradle for both charging and
ActiveSync over USB |
| |
|
| Operating
Temperature |
-10°C to +50°C (14°F to 122°F) |
| Storage
Temperature |
-40°C to +60°C (-40°F to 140°F) |
| Humidity |
Up to 90% Relative humidity Non condensing |
| Drop
Specification |
1.3m (4.26ft) to concrete, 6 drops per 6 sides
over operating temperature; 1.5m (5ft) to concrete,
2 drops per 6 sides at ambient temperature 23ºC
(73ºF) |
| Sealing |
Internal Components Conformally coated |
|
Electrostatic Discharge |
+/-12kV air discharge, +/-8kV direct discharge |
| Construction |
RoHS compliant |
| |
|
|
|
|
|
|
