|
|
|
|
The Biometric Tri-Scan Reader combines Contact Smart
Card, Contactless Smart Card (RFID) and Finger Biometric
capture in a rugged, snap on peripheral for the Motorola
MC55/65. This makes it ideal for mobile fingerprint
biometric and ID applications. The fingerprint sensors
are FIPS201 compliant as single finger capture devices.
The Tri-Scan readers are powered by the terminal
and the mechanical design allows them to remain compatible
with existing MC55/65 accessories such as the single slot cradle and car charger.
The biometric core uses a rugged, high image quality optical fingerprint sensor. The Tri-Scan Reader is compatible with most contact
and contactless Smart Cards including all Mifare
contactless cards. The contactless card reader is
hardware compatible with the CAC card and ICAO ePassports. The contact Smart Card reader is compliant
to ISO7816-1,2,3,4.
Available end of Q3 2012
Please note: Use of this snap-on with
the MC65 requires OEM OS version
2.31.0002 and USB Rollup HotFix
March 2012 - please update
terminal before using accessory.
More information is available
here
For more information on biometrics, click
here
|
|
|
| Sensor resolution |
500dpi (optical) |
| Pixel array |
256 x 400 pixels (optical) |
| Sensor area |
14 x 22mm (optical) |
| ESD protection |
IEC 61000-4-2 Level
4 ±15kV |
| Image size |
Approximately
100kbyte |
| Template size |
Algorithm dependent
– typically 100-400 bytes |
| Compliance |
ISO7816-1,2,3,4
PC/SC, EMV2000 Level 1 capable.
T=0, T=1 Protocol. I2C |
| Connector |
Meets ISO 7816-2,
rated for >100 000 insertions |
| Card size |
Full (ID-1) |
| Card support |
Up to 420kBps card
interface, clock frequency up to 8MHz,
5V, 3V, 1.8V smart cards |
| RF Transmit
Frequency |
13.56MHz |
| Supported RFID
Standards |
ISO14443A,
ISO14443B, ISO 15693 |
| Supported
contactless cards |
+ ISO15693
+ ISO14443A/B
+ Phillips: MIFARE, DESFire, MIFARE ProX, SMART MX, iCode
+ HID: iClass |
| Reading
distance |
Intended for
in-slot card reading, capable of reading up to 2.5cm
(1") from back surface dependent on transponder type |
|
|
|
Charging of host terminal |
Possible through
reader |
|
Reader power supply |
Powered from host
terminal |
|
ActiveSync |
via USB,
automatically switched when connected to a PC |
|
Dimensions |
90×82×36mm
(3.54"x3.23"x1.42") |
|
Weight |
110g (3.9 oz) |
|
Enclosure material |
Lexan Polycarbonate/ABS |
|
Colour |
Grey |
|
Material finish |
Sparked surface |
|
Mechanical attachment |
Snap-on action |
| Docking |
Attachment
maintains dockability with Motorola docking cradle for
charging and ActiveSync |
|
Operating Temperature |
-10°C to +50°C
(14°F to 122°F) |
|
Storage Temperature |
-40°C to +60°C
(-40°F to 140°F) |
|
Humidity |
Up to 90% Relative
humidity Non Condensing
|
| Drop
specification |
1.3m (4.26ft) to
concrete, 6 drops per 6 sides over operating
temperature; 1.5m (5ft) to concrete, 2 drops per 6
sides at ambient
temperature 23ºC (73ºF) |
| Sealing |
Internal components
conformal coated |
|
Electrostatic discharge |
+/-15kV air
discharge, +/-8kV direct discharge |
|
Construction |
RoHS compliant |
|
|
|
|
Terminal |
Windows Mobile |
Supported OEM OS |
| MC5590 |
6.1 |
3.38.0004 or higher |
| MC5590 |
6.5 |
3.38.0004 or higher |
| MC55A0 |
6.5 |
1.34.0005 or higher |
| MC55N0 |
6.5 |
1.36.0017 or higher |
| MC659B |
6.5 |
2.31.0002 or higher |
|
|
|
|
|
EMI/RFI |
TBC |
|
Electrical Safety |
TBC |
|
|
|
Please note: Use of this snap-on with
the MC65 requires OEM OS version
2.31.0002 and USB Rollup HotFix
March 2012 - please update
terminal before using accessory.
More information is available
here
|
